Questions & Answers for: Jeep Grand Cherokee stuck solenoid

stuck in 4WD...hard making turns. this seems to be because either the connection to the solenoid is loose or faulty or the solenoid is not activating. the transmission control module sends a signal to

...stuck in the maximum position giving you extremely late shifts. There ISN"T any modulators or vac lines on any Chrysler automatics Hello thank you for using FixYa.com my name is David It could be a ...

Solenoid's bendix gear is stuck. Have someone hit (not too hard) the starter while you try to start the car. This usually works by dislodging a stuck bendix gear. ·Make a simple test of the alternator

...- bu now stuck in first - any sugesstons anyone please ??? Engine codes should be read with a scanner. If electronically controlled transmission, could be bad solenoid pack on

...stuck in, replace the solenoid that corresponds with that gear. If you are not sure, remove all three. Additionald etalis can find in this link: Jeep Secc-21S-Automatic-Transmission-42RE Why you askw ...

Solenoid's pinion gear is stuck. Have someone hit (not too hard) the starter while you try to start the car. This usually works by dislodging a stuck pinion gear. ·Make a simple test of the alternator

Solenoid's pinion gear is stuck. Have someone hit (not too hard) the starter while you try to start the car. This usually works by dislodging a stuck pinion gear. ·Make a simple test of the alternator

stuck in N automatic If the gear shifter is getting stuck, the shift solenoid or fuse that powers it has gone bad and is not releasing the shifter when you step on the brake, as it should.

...gmc throws p0751 code will trans x help this The code is for a stuck shift solenoid. I doubt any additive would make a difference. The solenoid would need to be tested, and its inside the

Solenoid's bendix gear is stuck. Have someone hit (not too hard) the starter while you try to start the car. This usually works by dislodging a stuck bendix gear. ·Make a simple test of the alternator