Questions & Answers for: stuck off

...off - still stuck. Powered on - Lens didn't move. Power off, on, off, shook the camera - Lens still stuck in halfways. pushed the lens in slightly, heard a click... scared I broke the damn thing, but ...

Stuck Off P0752 Shift Solenoid A Stuck On P0753 Shift Solenoid A Electrical P0754 Shift Solenoid A Intermittent P0755 Shift Solenoid B Malfunction P0756 Shift Solenoid B Performance or Stuck Off P0757

...stuck in 'Off' position wahl cutek ceramic hair straightener , code: za105,model: cutek. Power button stuck in 'Off' position, unable to remove all screws, can get to 2 out of 4! Any ideas on ...

...off (relays are stuck open) Dodge:Relay always off (relays are stuck open) Dodge:Relay always off (relays are stuck open) Dodge:Relay always off (relays are stuck open) Dodge:Relay always off (relays ...

...STUCK OFF MECHANICAL CONDITIONS, POSSIBLE CAUSES, ATF LEVEL IS TOO LOW OR THE FLUID IS BURNT OR CONTAMINATED, INSPECT TRANSMISSION LINES TO RADIATOR FOR BENDS OR RESTRICTIONS, OIL PRESSURE SCREEN IS ...

...STUCK OFF PO 761 SHIFT SOLENOID C PERF OR STUCK OFF P0751 Shift solenoid shift A performance or stuck off/ 1-2 shift solenoid valve performance P0761 Shift Solenoid C Performance or Stuck Off P0734 ...

...off. It is stuck and I cannot turn it to the off position. Why will it not turn? Cannot turn the key off .... the ignition switch is stuck or something.... I had to disconnect the battery in order to ...

...off switch stuck in on position or Vice-Versa? I have noticed on mine at times the darn thing seems real hard to pull. To set choke which in turn sets switch to on/Run. What I found in this issue to ...

Stuck Off P0752 - Shift Solenoid A Stuck On P0753 - Shift Solenoid A Electrical P0754 - 1-2 Shift Solenoid Intermittent P0755 - Shift Solenoid B P0756 - Shift Solenoid B Performance or Stuck Off P0757

stuck and won't come off. I've tried pressing down,... Make sure all the buttons are in the neutral position. Reply ... In case of clarification- Turn the lid back on before unlocking, then twist off.