Questions & Answers for: Toyota ECHO strut assembly

...side front wheel,only when i hit a small or big bump i drive a toyota echo 2000, i replaced the strut ( mount not sure) ball bearings along & sway bar( was loose so had it replaced).my airbag ...

Replacing only the driver side mirror w/o replacing the assembly. Is it possible to only replace the driver side mirror without replacing the entire assembly for a 2004 Toyota Echo? You should be able

...axle, losen axle nut with tire on the ground if possable, much easier without air tools. Disconnect strut at top of spindle, outter tie rod, and lower balljoint. Using a prybar pop axle out of ...

...strut assembly is under a great deal of compression and when released can fly and hit an unsuspecting individual. Ideally this should be done by a highly qualified professional as it can lead to ...

how to replace 2000 toyota echo rear struts It don't have struts shocks let go the bolts under the car the other bolts for the top are in the back inside

knocking noise in the front direction when hiting bumps while driving Could be either the struts are getting weak or the swaybar links getting loose.

changing wheel bearing on 2002 toyota echo (front) you have to remove brake pads, rotors, struts, tie rod end and lower ball joint. whole unit comes out then. the bearing has to be pressed out and new

...need to change the left & right drive axels remove road wheel . remove axle nut , uncouple lower strut and pull disc housing out wards may have to tap axle. the axle is held in the diff housing ...

steps to change the heater core on a toyota echo 2001 At the user end it is not possible to replace the heater core at home. It requires to remove the complete dash board assembly, and many other ...

how do i replace the fuel pressure regulator where is it located and what is the best way to replace it Replacing fuel pressure regulator on Toyota Vitz, Yaris and Eco: 1. Remove rear seat. 2. Remove ...