Questions & Answers for: Nissan Maxima strut assembly

strut assembly, try taking a chisel or prybar and putting it where the axle enters the trans. These have steel snap-rings that can really hold them in there, so you will have to use a little force. If

...strut assembly? the mounting bracket for sonar adapters is in the way of the strut center bolt. First you must remove the rear seat to gain access to the top strut mounts. The bottom of the rear seat ...

Strut Assembly for nisan maxima 2000 model, driver side and passenger side thanks Raise the car and remove the wheels. Loosen the bolts holding the strut to the steering knuckle. Before removing them,

assembly with strut, sping, and mount. This is the best way to buy if you doing them yourself. A little more expensive but you are replacing everything and will not have to take them to a shop to have

Does a Nissan Maxima have rear struts ? its actually a shock with a strut like assembly strut cartridge top and shock mount on the bottom I guess its a mutt...

strut assembly and the other is just the strut itself. If you know where to get spring compressors you can use those to compress your old springs and use them on the New strut, usually saves money. If

...STRUT ASSEMBLY. BE SURE TO THE END OF THE SPRING IS IN THE NOTCH ON THE LOWER SEAT.INSTALL UPPER MOUNTING INSULATOR. YOU WILL NEW LOCKNUT FOR THE CENTER RETAINING NUT OF THE COIL SPRING. CENTER ...

...strut assembly for $500. Right out of the shop I had no spring and they bottomed out over speed bumps. Went to MD state inspection and they said I need rear struts and mounts - struts leaking ...

take the quick strut option faster safer and better for your application any auto parts store should carry the quick strut assembly hope this helps u on your journey to a smooth ride regards Chris ...

...of adjustment rear wheel bearings which could cause our noise. Look at the mounting points for the struts/shocks, the sway bar, and any other suspension components. If you see red rust that