Questions & Answers for: Chrysler Sebring strut assembly

Have a 1998 Chrysler Sebring Convertible - makes a crackling-creaking, sometimes thumping sound, when turning, slowing or stopping. Mechanics even described it as sounding like someone walking on ...

Ad

Question about 2000 Sebring

2 Answers

...with the strut assembly. Suggest getting under the car while someone pushes down on the front end to get it squeaking. Good luck! strut bushings? stabilizer bushing? transmission mount? motor

Ad

Question about 2000 Sebring

1 Answer

I need diagram for front strut assembly for a 2002 sebring they dont make one im a technidion been working on chrysler's for years what is it your trying to do ?

Question about 2000 Sebring

2 Answers

...strut assembly but i betting its just cold grease when it gets cold the grease gets thick and the rubber bushings in the suspension get stiff making squeaking noises i would take it to a oil changing ...

strut assembly. The wheel hub was removed from the steering knuckle in the process. When all was re-installed car will not engage in any gear (just a grinding noise) and will roll through parking gear

Question about 2000 Sebring

1 Answer

...strut or the complete assembly. Recommend complete assembly and replace both sides and have an front end alignment done after installation. If doing your self use caution with compression tool. This ...

...? Physically broken connection joint between U-shaped bar or strut and wheel assembly. Have photos which show it clearly. Can it be done by a non-mechanic ordering the part? Replace the rear ball ...

...strut assembly on a 2004 Sebring Convertible? The videos show a trunk access but its not there?Is it located behind the back seat? i have tried to locate the rear strut assembly from the trunk but ...

...front suspension. none of the parts that come on these cars have grease fittings. usually the upper strut bushings are the first to go. like i said, you need to make an inspection. you may have parts ...

...Assembly? 1. top 4 strut mounting bolts 75 ft, lbs, 2. upper control arm bolts 66 ft. lbs. 3. upper ball joint nut (ball joint stud nut?) 20 ft. lbs. 4. strut fork mount bolt (clevis to control arm ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...