...assembly. Remove top strut mountings. Use spring compressors. Use bar & chain to lover wishbone, remove strut. Refit new strut - Use now lower bolt& nut. Refit wishbone bottom balljoint Remove spring ...
...strut assembly out first, then remove the 2 bolts going through the strut and spindle assembly, then remove the top 3 mounting nuts on top of the strut tower. the unit will fall out so be careful. ...
there is a broken coil spring on the front right over the strut is that hard to fix no if u change the hole strut assembly,,other wise u need a strut mean,,,
...strut assembly then a spring compressor is not required.If replacing just the mounts then definitely a spring compressor is required. Please use extreme caution when compressing and removing strut ...
...a strut yes its a strut you have struts....shocks are seperate from the spring, struts are a built into and part of the the spring/strut assembly. A picture would work best to describe the
...strut assembly..put a jack under strut to hold it in place .remove the 3 nuts. 5. pry the bottom of strut out of hub 6. drop out strut and spring assembly. 7. use 2 spring depressors to squeeze the ...
...pounds of torque for bolts holding on the rear strut and spring assembly on a 98 grand prix gt. We have installed kyb fast struts strut to body mount nuts 33 ft. lbs strut to knuckle nuts 90 ft. ...
...strut assembly 17 Inch Wheels Need rear strut assembly 2006 pontiac grand prix 17 inch wheels are you looking to by the parts or have them done by a professional shop like unique auto care , 611 main ...
...strut assembly 17 inch wheels Looking for a rear strut assembly for a 2006 PONTIAC WITH 17 inch wheels - What part of the suspension is bad? ...
...strut assembly ,(2) to the body. 2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information. 3. Place jack stands under the front suspension support. 4. Lower ...
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,435 Questions
1,496 Questions