Questions & Answers for: Ford strut assembly

...strut and spring assembly from vehicle 16.Compress spring with Spring Compressor 17.Place 10mm box-end wrench on top of shock strut shaft and hold while removing top shaft retaining nut with a 21mm ...

Ad

...strut assembly. Make sure the spring is correctly seated in both spring seats. Item Part Number Description 1 ? Dust Boot (Part of 18045) 2 N803826-S100 Front Shock Absorber Mounting Bracket Nut (3 ...

Ad

...strut assembly removal requires, disconnect the lower spindle clamp should be 1 or 2 bolts and the swaybar links. then remove and replace the 3 bolts on the top of the shock tower (do not remove the ...

...strut assembly do not remove this nut unless the strut is in a spring compressor when you reinstall the new strut assembly bolt every thing back up like it was and get an alignment done as soon as ...

strut assembly on my 2002 Ford Escape? I have the replacement strut assembly I just need to know how to remove the old and install the new. Thanks theres not really much anyone can tell you except for

Question about 2002 Escape

1 Answer

...strut assembly from the car to replace the springs and as such you will need a spring compressor to compress the spring for removal from the strut assembly.there should be 3 nuts at the top of the ...

Question about 1998 Windstar

1 Answer

...strut assembly-to-steering knuckle pinch bolt. If required, slightly spread the steering knuckle to ease the removal of the strut. Pry down on the lower control arm and roll the strut base out of the ...

Question about 1999 Taurus

1 Answer

...strut assembly:--- How to replace Strut Assembly? http://howtobyme.blogspot.in/2012/02/how-to-replace-strut-assembly.html ----------How to remove Strut Assembly,the Coil spring? ...

mount (upper end) in place. DO NOT remove the single large nut at the top of the strut assembly. Wiggle the strut assembly out. Slide the new strut assembly in bolt it back in. Put wheel back on. Done

...the top center nut that holds the strut assembly to that bearing plate assembly should be 76 ft lbs (with the use of a spring compressor of course!) wheel lug nuts should be torqued to 98-100 ft ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...