Questions & Answers for: Chevrolet strut assembly

Question about 2002 TrailBlazer

1 Answer

...strut assembly should come out, you need a strut sprig compressor to compress.the springs,remove the nut at the center of the strut,rplace the stut,instalation is the reverse of the procedure..Good ...

Ad

Question about 1998 Malibu

1 Answer

...strut assembly should be free now. Pull strut assembly out and set it on the floor The top nut holds the top bearing plate and that holds the spring in place. Remove the top nut Remove old broken ...

Ad

...strut assembly. carefully lower the floor jack and remove the strut assembly. If you don't have the spring compressor take the assembly to a shop and pay them to do it. If they are decent they won't ...

...STRUT ASSEMBLY, SOLD INDIVIDUALLY -- Built with quality that matches or exceeds OE design and calibrated to compensate for worn suspensions, this gas-charged twin-tube standard replacement strut ...

strut is removed as an assembly of these items. Then the spring needs to be safely compressed by a tool designed for this, the nut taken off the end of the strut, the spring pressure released and then

...strut assembly , the upper mount has either 2 nuts or 2 bolts holding it to the car , the 2 Lower bolts holding the strut to the spindle/control arm shouldn't have eccentrics in them so the alignment ...

Question about 1999 Malibu

2 Answers

...assembly of strut,coil,and upper strut bearing as one unit.Yes it is going to be more expensive to do it this way but the car is 11 years old and I never replace the strut and use the old bearings.So ...

...strut to the rear wheel/brake assembly and I believe it is one bolt in the trunk. I changed mine about 3 years ago. You shouldn't need any special tools for this. You should have a 4 wheel ...

Question about 2002 Venture Passanger

1 Answer

...strut assembly with the spring installed.These are best as you get a new top strut mount which includes a new top bearing ,a new spring and of coarse the new strut. 3 bolts at the top and a sway bar ...

strut assembly together. most parts stores sell what they refer to as a "quick strut assembly". all you would do at that point is unbolt the old strut assembly and bolt the quick strut one on. no need

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...