Questions & Answers for: Harley Davidson FLHTCUI Electra Glide Ultra Classic strap wrench

I cannot get any kind of wrench on the oil filter on a 2000 Harley Ultra.I cannot sip an oil filter wrench on nor can I get a cap wrench on. There is a knob of some sort on the frame at the end of the

l have a 2007 flhtcu and my handle bars are loose. what do i need to do to tighten them. must i remove the entire farring i own an 07 flhtc and it takes an allen wrench i think a 3/8"

2005 Harley Davidson FLHTCUI Electra Glide Ultra Classic clutch adjustment ? To adjust the clutch, first find the clutch cable adjuster. It should be somewhere along the downtube of the frame in front

remove starter from 2007 Harley Davidson touring. What size allen ? The two large bolts that hold the starter on use a 1/4" Allen wrench as best as I can remember. Good Luck Steve

...strap with your right hand ( this step is a slight pain in the but) one the seat has been removed you then can access your battery. in order to remove you need some really good finger strength or a ...

strap wrench for those hard to reach and no room filters Sears has a 3 finger wrench 13 bucks .. bites good you use a 3/8 drive..to turn it..I use it works well ..I have got good info at harleytalking

...on the big island of hawaii do you have anyy pics I assume that you said that your seat has a hand strap across the back of the seat. You also have the bolt out that holds the seat on. You may have

down if installed, undo the negative cable, undo the positive cable, pull up on the battery removal strap if present and not buried under the battery etc OR otherwise lift the battery out

at the center of the back of the seat that holds it to the fender. Then remove one side of the seat strap from the left side. Push seat rearwards and remove

which way does the rear left spacer on a 2006 ultra classic go? Locate the wheel in the rear swingarm and slide the wheel far enough forward to slip the belt over the sprocket and then slide the wheel