Questions & Answers for: Mercury Grand Marquis strap wrench

Question about 1996 Grand Marquis

1 Answer

remove and install new starter i can't get the top bolt out because i can't fit my hands in there You need a 1/8 in. ratchet and extension with a 10 mm swivel socket or a 10 mm short wrench. Get the ...

Ad

Question about 1995 Grand Marquis

1 Answer

removal of starter. Is there a special tool or wrench needed to to remove the top 2 bolts You need a socket extension longer than the starter. A starter wrench may help. That wrench is sort of U ...

Ad

How do you remove the fan on a 1993 grand marquis Ford requires a special wrench to turn the nut to take off the fan. Leave the belt on,and use a open end wrench(you may have to buy a special wrench ...

Question about 1988 Grand Marquis

1 Answer

fuel tank and two straps were replaced by monroe but did not replace the fuel strap (that's what they called it) now gas gauge is not working want another 300 to repair it sensor inside the gas tank ...

...4Place a second jack under the fuel tank to prevent the tank from falling to the ground when the straps are removed. Ensure the jack is in the center of the tank. 5Unbolt the two straps with a ...

Question about 1994 Grand Marquis

1 Answer

...a second jack under the fuel tank to prevent the tank from falling to the ground when the straps are removed. Ensure the jack is in the center of the tank.Unbolt the two straps with a

Question about 2008 Grand Marquis

1 Answer

...than most because you are losing too much to come from one Relay. Check your Grounding wires and straps. These would be metal straps with no plastic covering or ordinary wires. Your problem is ...

Question about 1996 Grand Marquis

1 Answer

cant get the rear shocks out. can get to the nut but cant stop shaft from turning what should i do use a large channel locks to grab the top part of the shock that protects the metal shaft from dirt ...

...hour to do alone.What others do not mention is be sure to loosen the bolts to the old part before strapping the wheel (the strapping is to prevent freewheeling/turning when steering wheel is ...

...wrench, and plenty of lubricant or penetrating oil-you may encounter rusted bolts, so let the penetrant soak in a few minutes. Do one strap at a time-unbolt it and it will swing down. Then you can ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...