Questions & Answers for: Dodge Ram strap wrench

2001 Dodge Ram 1500 Water Pump? My water pump went out on my 2001 Dodge Ram 1500 (5.2). The manual said that I have to have a spanner wrench to take the fan off, but I can not find a spanner wrench ...

Putting new brakes on my 1999 Dodge Ram1500 Trying to figure out if I have the right tools, to do the job. I believe i need an allen wrench to take the calipers off?? You will also need 5" clamp, ...

How do I remove the fan from the water pump on 1998 dodge ram 1500 3.9 engine Have you bought the new pump yet? If so notice the direction of the treads. The fan/clutch is threaded on. The parts store

I need to change out my serpentine belt on my 1996 dodge ram truck, and I cannot locate where to take off the tension I know it is somewhere under the altenator it a pulley on the left side below the ...

how do you get the nut off the back of a 2001 dodge ram 1500 fan clutch use a 36mm wrench buy one at a cheap place and smack wrench with a hammer

...strap wrench and a large wrench to remove it. I ended up using a 1/4 inch thick piece of steel, about 2 inches wide and 12-15 inches long and drilled 2 holes into it to line up with the bolts on the ...

How do you remove fan from water pump for 1996 dodge ram truck There is a special wrench that the parts stores dont carry. Cant remember which web site I found it but it is available. it looks like a ...

i need to know what star wrench i need to remove the brake calipers i think its torx 21 or 22 or allen wrench

I have a 94 Dodge Ram 1500 4x4 5.9L With a bad fuel pump. What I would like to know is how to release the fuel pressure in the line before removing the fuel pump. Also do I have to drop the fuel tank ...