Questions & Answers for: Toro strap wrench

strap wrench large open end wrench and cannot budge this spool.trimmer is less than 1 year old and never replaced line on this trimmer before. With most trimmers, you may have to push the spool casing

REPLACED THE BELT AND 5 MINUTES INTO THE SNOWBLOWING THE BELT SHREDDED AGAIN Check wheels for the belt there is a place or a faulty strap forces were too high.

Strap wrench- actually two that come in a package for like 12 dollars. One is larger than the other. I put the larger strap wrench around the bottom of the housing and the smaller one on the top part.

WONT START TORO PH-XT675-2011 USED ONLY 5 TIMES PUII CORD WINDS BUT DONT START, PUT GAS IN CARB STARTS THEN BULGS THEN GOES OUT AND WONT START. You have to take carb off and remove bowl with #10 ...

Toro 6.75 mower has a recessed plug impossible to remove with socket or wrench. Model 20371 but I know there are other models of Toro with this design. if your wanting to chang oil the shops tilt it ...

Can't turn bolts holding blades on my new purchased used (year 2000) 44" Toro floating mower deck. Which way are these bolts supposed to go? I've tried both ways and none of the three blade bolts will

how to get parking brake to release remove the carb from mower. take off bowl with #10 wrench look in tube u will see jet. take a sewing needle push through it this will unplug it and put bowl back on

What spark plug wrench is used to remove the spark plug on a TORO 38624w snowblower? I need to know what type of spark plug wrench needs to be used on the 11.5 hp Briggs & Stratton engine? it is prob ...

how do I change blades on a toro 42 in zero turn changing blades Lift front of machine and secure, Use a pipe wrench over top of blade and against deck, to keep blade from turning, Use 1/2 " breaker ...

CHANGE SPARK PLUG ON TORO CCR 3650 SNOW BLOWER First disconnect the spark plug wire from the spark plug. Then use a socket wrench to remove the spark plug. Install the new spark plug into the cylinder