Questions & Answers for: Mercury strap wrench

...strap mounting bolts and tighten to 35 ft. lbs. (47 Nm). Remove the jack. Connect the fuel return pipe to the fuel feed pipe. Attach the rear fuel feed pipe to the inlet side of the fuel filter. ...

Ad

Question about 1993 Villager

1 Answer

...Strap Wrench D85L-6000-A or equivalent to hold the water pump pulley (8509) while removing the four water pump pulley bolts. Remove the water pump pulley from the water pump (8501). Remove the ...

Ad

...Strap Wrench D85L-6000-A or equivalent to hold the water pump pulley (8509) while removing the four water pump pulley bolts. Remove the water pump pulley from the water pump (8501). Remove the ...

...Strap Wrench D85L-6000-A or equivalent to hold the water pump pulley (8509) while removing the four water pump pulley bolts. Remove the water pump pulley from the water pump (8501). Remove the ...

Question about 1995 Villager

1 Answer

...strap wrench tool No. D85L-6000-A, or equivalent, to hold water pump pulley while removing water pump pulley bolts. Remove water pump pulley from water pump. Remove crankshaft pulley. Remove five ...

Question about 1995 Villager

1 Answer

...STRAP WRENCH HOLD CRANKSHAFT PULLEY WHILE LOOSEN IT.BUT YOU NEED A CRANKSHAFT DAMPER REMOVAL TOOL.OR HARMONIC BALANCER REMOVAL TOOL.YOU NEED STRAP WRENCH TO HOLD CRANKSHAFT PULLEY WHEN TIGHTEN ...

...4Place a second jack under the fuel tank to prevent the tank from falling to the ground when the straps are removed. Ensure the jack is in the center of the tank. 5Unbolt the two straps with a ...

Question about 1994 Grand Marquis

1 Answer

...a second jack under the fuel tank to prevent the tank from falling to the ground when the straps are removed. Ensure the jack is in the center of the tank.Unbolt the two straps with a

...wrench, and plenty of lubricant or penetrating oil-you may encounter rusted bolts, so let the penetrant soak in a few minutes. Do one strap at a time-unbolt it and it will swing down. Then you can ...

...strap wrench on it or some very large channel locks with a rubber sheet so that you don't tear it up. When you get it loose, be sure to clean the threads and then put a thin coating of oil on it when ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1999 Mercury Cougar
1999 Mercury Cougar

1,305 Questions

2001 Mercury Sable
2001 Mercury Sable

689 Questions

2000 Mercury Sable
2000 Mercury Sable

627 Questions

2002 Mercury Sable
2002 Mercury Sable

646 Questions

2000 Mercury Cougar
2000 Mercury Cougar

630 Questions

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...