Questions & Answers for: John Deere strap wrench

remove pulley on mower deck spindle These are generally held on with just one large nut, I recommend you use a impact wrench otherwise it mau prove difficult ( you wont be able to hold the spindle ...

how do you adjust the valves and replace the flywheel shear key on a lx 176 9fc420v kawasaki sir as for the flywheel i use a good sturdy steering wheel puller from snap-on part number cg6095a it works

I HAVE A JOHN DEERE RIDING MOWER AND I AM TRYING TO CHANGE THE MOWER BLADES, THE BLADES WILL NOT LOCK SO I CAN TURN THE NUT THAT IS HOLDING THEM ON. SO HOW DO I LOCK THE BLADES SO THEY WILL NOT TURN? ...

remove oil filter Hi, undo it with a filter wrench or strap wrench. only re-tighten by hand. regards Phil

Lawn mower blades won't budge, even w/ 1/2' drive impact wrench Lawn mower blades won't budge, even w/ 1/2' drive impact wrench Hi, warm the nuts up with a heat gun or oxy ...

How do I level the deck on a John Deere X500 mower FInd and buy a deck level guage (makes it so much easier) photo.Adjust the front tire pressures to 14 psi. Set the rear tires to 10 psi. Make sure ...

Where is the spark plug? The spark plug will be located on the engine under a rubber "boot". Remove this boot and you will see the spark plug. The boot is attached to the spark plug wire, you should ...

930M. Why does the wrench light blink and the blades won't turn? The PTO switch is still good, but when I pull the switch the wrench light blinks and the blades won't turn Wrench calls for tech-help. ...

I WAS CUTTING THE GRASS AND MY WRENCH LIGHT CAME ON ON MY JOHN DEERE ZERO TURN THE WRENCH LIGHT CAME ON WHILE CUTTING THE GRASS ON MY JOHN DEERE. WHY IS THAT? read your manual you didnt specify what ...

John Deere GY00115 Mulch Kit mower model S100 Anyone having problems attaching the mulch kit to the mower. Cannot get the tab on left side to engage mower deck. Also the rubber straps are keeping the ...