Question about Gigaset 4210 Cordless Phone
Handset flashes "searching" and has stopped working The handset continues to flash the word searching. I have the user manual and have tried to register both the handset and base with no luck. I even ...
...base unit - and replaced in the stand and it flashed "Searching...". I left it like this and it just keeps flashing "Searching...". Is there a solution to this problem, or should I just scrap these ...
...flashing base 1 and other flashing searching. I've tried all the resets ect but no luck- Help! Then the base is bad. I have 1 base like that also... nothing can be done other than send it out to be ...
...base unit, and two others] they have all stopped working today. there is no dial tone, and there is a flashing clock signal just next to the battery indicator --what does this mean please? the phone ...
FLASHING BASE 1 - PHONE'S LOCKED My phone is completley locked . I can't dial out, recieve calls or even hear a dial tone. It is flashing BASE 1 Unplug the batteries for 30-45 seconds. Reinstall, and ...
base station..press and hold paging/register key for 3 seconds Than on the hand unit select function key and open "MENU" select "SETTING" from menu and confirm (Ok) Selecect "HANDSET" and confirm Than
Question about Gigaset 8825 Cordless Phone
...flashing base at us and doesn't work. we've tried to register it to the base according to instructions.. it flashes registering but then stops and doesn't register.. it keeps flashing base. what is ...
...base unit or the phone cable that is faulty. In any case the phone cannot connect to the base unit, so my advice would be to check the base unit (normally also the charging station), and make sure ...
...base is connected to AC power correct because the phone is chargering. Phone line is OK too. YOU SHOULD HARD RESET THE UNIT When restoring factory settings: u Handsets are de-registered - When ...
Question about Gigaset Digital Cordless Phone with Hybrid IP/Landline Calling (A580IP)
...flashing base.The phone line and the power line to the base station are both ok.When I place the handset in the charging cradle, I get the beep response; when I place the other handset in the base ...
Usually answered in minutes!
95 Questions
50 Questions
12 Questions
35 Questions
63 Questions