Questions & Answers for: Panasonic stop base unit flashing

Question about 5.8GHz Cordless Telephone

2 Answers

...base unit press and hold the ittle button on the left side of the base unit for about 5 sec. On the handset press up or down to select a base unit number. Wait untill BS PIN is displayed Enter the ...

Ad

Question about KX TG1000N Cordless Phone

1 Answer

...base unit must be connected to the AC adapter and the power must be on Press the following sequence of buttons on the base unit: * * 3 3 5 7 8 2 When the display reads "Enter Base ID", deregistration ...

Ad

Question about KX-TGA101S Cordless Handset

3 Answers

...stop, then repeat this step. -after the base unit beeps, the rest of the procedure must be completed within 1 minute and 30 seconds. HANDSET Press [OK], then wait until a beep sounds and Y stops ...

Question about KX-TG5422M Cordless Phone

1 Answer

...base unit or charger. If you accidentally assign another handset’s extension number to it, the other extension will stop functioning. 1 Handset: Press {MENU}. 2 Scroll to “Initial ...

...base, press select until you see the intercom number you wish to register it to. Stop there and push the Call button until the charge light flashes Push OK on the handset, and it should register Hope ...

...base unit was about to go a few days ago. Have had the phone for years with intermittent problems but it has been for quite awhile now. However, the screen on the unit started to blink a bit a few ...

Question about KX-TG4500 Phone

3 Answers

...base unit We had this same problem and ordered the corresponding battery off of Amazon. It was around $20. We put the battery in the base and it continued flickering for about ten minutes, but was ...

Question about KX-TG2357 Cordless Phone

2 Answers

stop registration by pressing [OFF] on the handset, and pressing [LOCATOR/INTERCOM] on the base unit. 1 Base unit: Press and hold [LOCATOR/INTERCOM] until a beep sounds. • The CHARGE indicator flashes

Question about KX-TG1033S Cordless Phone

1 Answer

...base unit beeps, speak clearly about 20 cm (8 inches) away from the MIC. 4 Press {?} (STOP) to stop recording. Using a pre-recorded greeting message If you erase or do not record your own greeting ...

Question about KX-TG1033S Cordless Phone

1 Answer

...base unit, the originally assigned handset stops functioning. Confirm the extension number of the handset by placing it on the base unit or charger. Lift the handset from the charger before ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phone Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...