Questions & Answers for: stop base unit flashing

Ad

...base unit's Flash/Speaker button keeps on flashing every 2 seconds. Nothing on the display. Actually the display panel on the base shows "Uniden" which also keeps on flashing every 2 seconds. None of ...

Ad

Question about CLX485 Cordless Phone

4 Answers

...stop registration by pressing [OFF] on the handset, and pressing [HANDSET LOCATOR] on the base unit. KX-TG6700B base unit does not respond to any button commands. anybody know what is wrong or how to ...

Ad

Question about CLX485 Cordless Phone

2 Answers

base unit should now stop flashing "CL". This indicates that you need to set the time and day on your answering system. During initial setup and any time there is a loss of power to the base, you will

Question about KX TG1000N Cordless Phone

1 Answer

...base unit must be connected to the AC adapter and the power must be on Press the following sequence of buttons on the base unit: * * 3 3 5 7 8 2 When the display reads "Enter Base ID", deregistration ...

Question about KX-TG5422M Cordless Phone

1 Answer

...base unit or charger. If you accidentally assign another handset’s extension number to it, the other extension will stop functioning. 1 Handset: Press {MENU}. 2 Scroll to “Initial ...

Question about Adagio Clock Radio

1 Answer

stop flashing The time display in the base unit of the Acu-Rite Wireless Thermometer Model 754 is flashing. I replaced the batteries in the base and remote as per the instructions. Everything was fine

...stop the light from flashing on the upper left of each unit?? Hello! At the base unit press and hold the "FIND" button for five seconds....Base unit will begin to beep; Ignore and hold for five ...

Question about KX-TG2357 Cordless Phone

2 Answers

stop registration by pressing [OFF] on the handset, and pressing [LOCATOR/INTERCOM] on the base unit. 1 Base unit: Press and hold [LOCATOR/INTERCOM] until a beep sounds. • The CHARGE indicator flashes

Question about KX-TG2357 Cordless Phone

1 Answer

...base unit, the originally assigned handset stops functioning. Confirm the extension number of the handset by placing it on the base unit or charger. Lift the handset from the charger before ...

Question about U7142 Humidifier

1 Answer

...unit OFF and unplug it. Empty the water in the base. Rinse the base with hot/clean water. Do not submerge the base! Visually inspect the base for dirt or mineral build up. If soft water is used ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Lands Phones Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...