stitch properly. the top stitches are too tight while the bottom stitches are all loose, forming little loops. Is there anything I can adjust to sort this out? Thank you Cath Graham I found a screw on
Question about Featherweight II 117
...stitch in still the same. Peggy pucker is caused by too loose or, to tight adjustment of: the thread tensioners both the bobbin tensioner and, the needle tensioner need to be adjusted: to adjust the ...
...stitch from down you must tight tension slowly sloly and if there is losse stitches from upper you must tight screw for bobin case spring slowly slowly until stitch format be agood condation. best ...
...tight around the bobbin. Make sure that the bobbin is in the right way around - the bobbin thread should double back on itself coming out of the bobbin holder. The bobbin tension adjustment is the ...
What is running stitch? Running stitch is a very basic stitch that is fast and easy. It's not a very tight stitch but if you keep the stitches close together it will help to strengthen the seam.
...(or a stretch stitch, if available) so the lycra will be able to stretch without popping the seams. Also, use a ball-point needle. If the tension is too tight, loosen it (Left=Loose,
Question about DDL-8700
stitch and the stitches are all bunched up tight. Tried adjusting tensions. First time using this machine. Could I of threaded it wrong? Or what? if you have the manual look for stitch length . if not
Question about DDL-8700
...tight or loose? could it be it needs a cam for the straight stitch How long since it's been thoroughly cleaned and oiled? Sounds like it is seizing due to old oil that has dried. Wheel on right side ...
...tight and it causes the material to gather. To prevent this lock the length of your stitch by going back over the last stitch and through the previous stitch or if near the edge. Do a blanket stitch. ...
...stitch on the machine is very tight...20 plus an inch...no matter where we turn on dial....also the cloth is not feedinfgfoward when stitching.... no debris or complications in bobbin visible....this ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions