Questions & Answers for: stitch settings

shark 384 - how can i get a straight stitch? What setting is suppose to be used to make a straight stitch on the machine? I can only get a zig zag stitch, even when the stitch selection is on "S". ...

stays in one place and won't move kenmore 12102 Make sure the stitch is set to a sewing stitch, (not a buttonhole stitch). Set the stitch length dial to a longer stitch. Make sure you have you feed ...

...settings on the 4 dials for the straight stitch? Do the ones on top have to match the wheel settings below? Thanks from a novice Hello, #1- tension settings, set this to "5" and leave it #2- width ...

My Kenmore sewing machine model number is 17630, & when I try to set the stitch length from a Straight Stitch setting to a Straight STRETCH Stitch setting, there isn't any difference. I have the ...

Do not know how to set the machine for simple straight stitch. I don't know your model but most machines have 2 common setting devices, namely a stitch width dial (how wide the needle swings) and a ...

straight stitch has peaks When set for straight stitch, there is a "peak" stitch about every 6-8 stitches Check your stitch pattern because you most likely have machine set to perform a ...

...component, like a blind hem stitch? Some machines consider straight stitch to be a zigzag stitch of width=0, while others have separate settings for a straight stitch and a zigzag (or other)

...does not tell much info Easiest way is to create a bar tack at one end of the buttonhole (widest stitch width and stitch length set to 0). Stitch maybe 4 or 5 stitches. Then move needle all the

...stitch the stretch stitch. I checked all the other settings, I made sure the needle was up when starting and I checked that I was turning the dial correctly. unplugand wait a few minutes then try ...

...to try to fix it yourself, start with checking the stitch length and tension settings. If those are not the issue, it may be best to take it to a repair technician for further diagnosis and