Questions & Answers for: Canon Rebel sticky rubber

...ERR 05.on the LCD. the flash housing unit is stucked!! Try to do this: use around 3 inches sticky tapes like scotch tape or masking tape, stick the 1/3 part on the flash housing unit , now ...

...back on and jiggle it. Is there any type oil or lubricant I can use to keep it from sticking> The sticky problem may caused by soda or food type of stain. It is best cleaned with amonia based ...

...been living without flash on my cam for a month. Until I realized that maybe something liquid and sticky by chance got where the flash is...so i just trid to hold uo the flash my insrting my nail ...

rubber grips get sticky after a time instorage. How rubber grips get sticky after a time instorag. How can this be clean ? Try using some rubbing alcohol on it. Should be able to clean it up. I had ...

...alcohol on a cotton stick and gently clean all edges of the flash and bodypart thus removing sticky stuff. 3. spray some WD40 on a cotton stick (do NOT spray directly on the housing!) and ...

...my flash won't pop up! What do I do? Impact damage to flash or spillage (usually something sticky like Coke) around the pivots (the two places at the back on either side that the flash ...

...flash hitting the brim of a 'gimme' cap or impact to the flash or most likely spillage of sticky liquid around the flash and its pivots.The XT also is notorious for having the bottom right ...

canon eos sticky handgrip sticky hand grip Old cameras get this sticky handgrip problem. Clean it with alcohol.

The flash will not open on my Rebel T1i so how do I get it open? This is usually caused by impact or sticky liquid spillage that acts like glue holding the flash down

...and indicates the flash did not pop up . Usually caused by impact to the flash (flash stuck) or sticky liquid spillage that acts like glue to hold the flash down (clean spillage with Windex on a