How to program T1 How do I program T1 on Norstar MICS? This is far too complex a topic to be handled here. I would highly suggest finding a local installation company to do this type of work.
rubber key pad and wash it off. If necessary, you can clean the key pad area of the circuit board with a damp cloth and wipe it dry. Be careful not to scrub off the carbon contact material from either
Hi, Can any body help us? We have a M7324 on a Norstar Compact with two line pools, Pool A is on Line 1,2,3 and Pool B on Line 4,5. We want to add another line on Pool B so I tried configuring Line 6 ...
Meridian Norstar M7310 stuck in Hands free mode Sound like a sticky button.
no dial tone on line one Call a tech in, no remote support for your issue.The carrier like Bell or AT&T handles dial tone going into the building, call them first.
Question about Meridian M2250 Console Phone
Norstar phone is automatically sending hook flash (or conference transfer) signal through active calls. Places outside caller on hold and can only reconnect by using feature 71. How can I avoid this? ...
Question about M7310 Corded Phone
Old Norstar phone-one line seemingly tied to one extension Call came in on main line, I placed on hold. I then, intercomed the extension I wanted. He never picked up, he just answered that he didn&
Hello, I cannot erase the "messages for you" on my norstar m7310 phone. Please help. Use the soft key below MSG to call the sender of the message. It possibly is not voice mail. After pressing the ...
My NorStar T7208 phone just displays a 1 all the time. How can I reset the display to show time, date, etc... The digit "1" might be sticky or defective on the key pad -If sticky then try to wiggle ...
How do I set dial tone on line 3? How do I set line 3 as automatic dial tone when the handle set is picked up? If you mean for line 3 to be selected when you pick up the handset, you need to program ...
Usually answered in minutes!
451 Questions
448 Questions
360 Questions
253 Questions
115 Questions