Questions & Answers for: kawasaki Csr 1000 starter removal

Question about 1983 Csr 1000

1 Answer

how to check oil on my bike How do I check the oil on my bike? There are usually two methods to check the oil. One is a dipstick and the other is a sight-glass. You should have one or the other ...

Ad

need wire diagram for the turn signal switch. there are three wire on the turn signal switch. Orange, green and gray. Please let me know the right seqence. Currently, the left sigal is great, the ...

Ad

Question about 1983 Csr 1000

1 Answer

twisted crank dissembly of motor,too replace twisted crank Replacing the crankshaft you will need to do complete engine tear down. If your mechanically inclined and you have the tools and must needed ...

Question about 1983 Csr 1000

1 Answer

When I Hit the starter button the starter just spins freely.If I rock the bike back and forth in gear and then hit the starter it will turn the motor over,but not for long.after about 2 seconnds the ...

Question about 1981 Csr 1000

1 Answer

gas leaks out 2 of the carb intakes after the bike sits for a while. Is this a float problem? Your overflow pins don't get enough pressure to seal the hole. Could be the barrels, or anything ...

where is the starter located on a 1982 kawasaki csr 1000 Hi. The stater is located on top of the engine under a cover just below the carbs on the left hand side, directly above the gear lever, paul

how do i remove a 1982 kawasaki kz 1000 starter motor Follow the specific instructions in the Factory Service Manual. Step 1 - Remove the heavy wire from the starter solenoid. Either end will suffice.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...