Questions & Answers for: starter motor subaru legacy

Question about 1993 Legacy

1 Answer

...starter motor, or on either end of cables. Id look there before swapping out starter.On cold days you might put a heater under car for a few hours before using it,do this carefully as to avoid a car ...

Ad

Question about 1995 Legacy

1 Answer

...do it yourself issue easy 2 do yourself follow your poitive termimal this will take you 2 the starter motor, unbolt wires off the back of starter then unbolt from bellhouseing starter should come

Ad

...starter, 1 day later, same problem, once cooled down will start, no over-heating issues, runs great, 117,000 miles. You need to make sure that the grounds for the body and motor are good. Sometimes ...

...motor and transmission join on the top, you should see the starter. Your main hot or red battery cable should lead right to it. It has 2 bolts holding it. 1 is the bolt to hold starter and trans ...

...wire between battery positive terminal & the exposed terminal on the solenoid. If starter motor now operates then it's the ignition switch. If starter motor does not operate then replace

...Subaru Legacy undo the nut by locking the bar with the socket on into the chassis ,then turn the starter motor over .,if pulley will not slid back with two big screwdrivers then use an pulley ...

starter motor for my subaru gt legacy 97 but its still not starting or winding over, is it the relay?? yes ! there might not be a relay if not you may need to fit one to ensure the starter solonoid is

Question about 1995 Legacy

1 Answer

...starter motor in .is it easy to take it out and put back in?if it is easy how do i go about taking it out Most starters are held in place by 3 bolts ant one or two wires u have to take the ground ...

...replace 2000 subaru outback starter motor? 1) Remove air cleaner box 2) Disconnect battery 3) Remove 2 bolts that mount starter 4) Remove wires at starter 5) Remove starter 6) Reversr order to ...

Question about 2004 Legacy

1 Answer

...the engine 2004 Subaru Legacy ? See if the engine turns over by putting a socket and ratchet on front bolt that hold the pully on. May have to have starter motor checked out if the motor turns

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...