.... see when you push it motor is turning faster than starter motor meaning need less fuel to start it so when you push it motor is winding faster than with starter motor good luck with this ...
..., and battery is charged and fine . Please help . Check your battery terminals,,make sure they are tight, then if you need to go further, have the starter motor checked out. Try a jump start
starter motor (11002) from excessive speeds during the brief period before the driver releases the ignition switch (11572) from the START position (as the engine (6007) starts). The ignition switch is
...starter motor retaining bolts. Raise and support the vehicle using safety stands. Loosen the two intake manifold support bolts and remove the support. Loosen the support bracket bolts and remove the ...
starter motor does not engage so i must turn it again,the car always starts but i am curious why this happens Your stater is sticking in a certain position. It will more than likely get worse. If your
Question about 1994 Aspire
...starter motor turns but does not cause the engine to turn over. If this is the case then the ring gear on the flywheel or flexplate is worn out, or the teeth on the starter motor are worn ...
...bracket. Loosen the starter motor support nuts and washers, then remove the support. Once the connectors are off it will come out. Be careful unplugging them and hold the plastic do not pull the ...
Question about 1995 Aspire
...starter motor solenoid outboard huge stud. using original huge ford nut there. 4: connect small solenoid key line faston terminal now. 5: look at battery neg lug loose now, then follow that NEG cable ...
Usually answered in minutes!