Questions & Answers for: starter flat spots

Question about 2000 Intrepid

1 Answer

...starter can develop flat spots and prevent starting, If you are handy and can locate the starter, try tapping on it with a rubber mallet then try starting the car.(I've started alot cars w/ starter ...

Ad

...flat spot' as Starter Roulette. When the starter is finished turning the engine over, it spins down and comes to a stop. Random. There is a position where the contacts are worn down (presumably). If ...

Ad

when key is turned...getting worse ....maybe ignition switch control module?...where located? sounds like the starter has a flat spot on the solenoid. remove and test the starter, replace if necessary

...right up. Hello. Chances are that you have one flat spot on the starter. When the starter happens to stop on that spot you have the problem. the fix is to replace your starter with a rebuilt one.

flat spot in your starter,this is why it only acts up from time to time when this dead spot is in the right position.Next time this happens tap your starter with a hammer and see if it will go then.If

...engage the flywheel any longer. Try removing one shim from the starter. If the starter works a little better then you have proven that the flat spot exists on the flywheel and needs to be

...If your battery is good then you have a flat spot in your starter motor. You can check that if you turn the crank a little and it then starts, you have a flat spot and it needs replacing or

...starter is bad or you have a flat spot on your fly wheel. Sometimes you can take a hammer and tap on the starter to get to turn again. If you have a flat spot and you get past it then you will most ...

Question about 2009 Brute Force 750 4x4i

1 Answer

...it's rotating but engine isn't turning over Check the starter to see if it is engaging the flywheel. There may be a flat spot on the flywheel so the starter cannot mesh with the teeth on the

...flat spot on starter,replaced selinoid but it still clicks when you push button,will kick start,do i need to replace starter YES starters can develop a dee bar on the commutator where that circuit is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...