Questions & Answers for: starter drive

...42'' riding mower Hi Starter drive is stuck. Clean by spraying brake kleen on starter drive and blow drive with air. Might have to remove starter to clean. Check for missing cogs on starter

...starter drive gear away from the flywheel. The shim is inserted between the engine block, and the starter. The thicker the shim, the more the starter drive gear is further away from the flywheel. ...

...starter drive (Bendix). On the 88 year model there is a solenoid that pulls the starter drive into engagement with the ring gear on the outer clutch drum. Inspect this linkage. Look for a broken pin ...

...starter drive or "Bendix" is bad. Disconnect the battery, remove the outer primary, remove the starter solenoid and pull the starter drive shaft, with the Bendix on it, out. Clamp the starter drive ...

...Starter drive (bendix) is bad. Starter drive is spring loaded and when cold sometimes hangs up or spring goes bad. 2 options - remove starter, disassemble and install new starter drive or just buy ...

...starter drive shaft & is not meshing with the ring gear properly. Remove the starter & replace the bendix drive or replace it with a remanufactured starter which has a new bendix drive. There ...

...starter drive us weak The drive or sometimes called "Bendix" is spring loaded and mounted in the nose of your starter. 2 options - pull starter, disassemble & install bendix or Just replace ...

...starter drive. Since you didn't tell me what year your bike is this is about as much as I can tell you. The starter drive (1984 and earlier) on the earlier model bikes is in the primary. On anything ...

...starter drive gear does not stay engaged On the E-Drive starter with the flywheel if the engine does not start as in the older Prestolite style starters. Why? I've noticed the starter drive ...

...starter drive out, then engine stopped trying to start, (Spin), and starter drive tried to engage again. That's the way a starter drive is supposed to work, ...