Questions & Answers for: Maytag Neptune start button

...start button is flashing once loaded and press start mchine only beeps from the control panel and does nothing the whole time the start/pause button is flashing please help i have maytag neptune ...

button. The start/pause and signal indicator lights are out and neigther these nor the off button will work. So, the washer will not start. I would like to fix this myself. What should I do? Buy a new

...start when button pressed plugged in, door closed, detergent added and detergent door closed, dial moved to correct setting and other button selections pressed (water temp, etc).It seems to be an ...

...start button turns off, does not spin Start buttons lights up then turns off. If I hold button I can get water to come in and drain out but will not spin. Two months ago start button seemed to get ...

...start button when i push the start button i don't hear the door lock lock but do heaer a hunm start check your belt it could have broken ,tensioner ,if you need a manual or parts you can get from ...

start button, the lights go on, but washer will not start. It does make a "normal" sound. When I push most buttons, the lights work, but I cannot change the temperature or "cotton" buttons. I can turn

...start button it will not stay on. If you hold the start button down you can here the machine trying to cycle through but nothing happens. I also saw a small spark when I first pressed down on the ...

start button and whoala It works now. Try getting familiar with your washer. do some light loads until you figure it out. It will eventually get where you need it to ,just be patient. Now I wash loads

start button does not work all the lights are on except the start button light the door switch could be bad ,it has to work in sync with the start button

...start button Machine will turn on but start button won't "click" to start Door hinge Is a little loose but door locks tight The start button will not operate if the door lock switch is not