Questions & Answers for: start button Sewing Machines

...start/stop button, the reverse button, and the needle position button all at once with one hand (one finger on each button). Hold them down and turn on the machine. What will come up is a ...

...start button? I've tried pushing every button, nothing works. My manual doesn't show it either. The start switch is the Led indicator buton. You will see it on page 12 of your manual. It is on the ...

start/stop button problem will the machine run on its own i have a kenmore sewing machine 16231, it has a start/stop button. i read in the manual if you push this button down the machine will sew on ...

...start/stop button Start/Stop button continually flashes could be a short in the wiring, the button could be jammedtaking the machine to a sewing machine shop would tell what'swrong for ...

start/stop button When Im doing the buttonhole and I press the start button. It says that the start button is disable. How do I enable it and to get this to work. There is a button above that says ...

...start/stop button, reverse/reinforcement stitch button or the thread cutter button was pressed while no thread cassette was installed. If the start/stop button is pressed before the sewing machine is ...

...start button starts the sewing but the stop button being pressed does not stop the stitching There's a possibility that your foot pedal is sticking; if that is the case, it's probably overriding the ...

...back stitch and I press the stop/start button for it to stop it carries on sewing. Can anyone help please. sounds like the start and stop button is starting to malfunction, probably needs to be ...

start button on innovis 1200 sewing machine The stop start button on my innovis 1200 wont change from red preventing me from sewing The start/stop button won't work if your foot control is plugged in,

...start/stop button. When I push the start/stop button the presser foot lowers but the red light does not come on. Hi, You will usually have to unplug the foot pedal if you want to use the start/stop ...