Questions & Answers for: Bulova start button

...flashes, press the button that corresponds with the Start/Stop button to change the hour, press the button marking reset should go to the minutes and so on, when finished press the mode button

start and reset buttons Press and hold the lower right button to display the date, then press the lower left button. If now all the weekdays are turned off, the hourly signal is turned off too. If the

...start blinking. Hit the "MODE" button (lower left) until the the settings you want to change are blinking. Hit the "ST/STP" button (upper right) to change that setting. Keep on hitting these two ...

start" button. To change the minutes or hours, oress the "reset" button until they start flashing and use the start button again. pressing the reset button again will bring up the date to change. keep

...Since then I've switched it back to AM/PM and it still beeps on the hours. How do I disable this? While pushing and holding the RESET button in, press the START button to toggle between CHIME

...START button 2. Press & release RESET button 1X quickly(Minutes will flash) & you change Minutes by pressing START button 3.Press & release RESET button 1X quickly(Hour will flash) & ...

...start flashing. Press the bottom left button to adjust for daylight saving time. 5. Press the upper right button. You will see the seconds flashing on the lower half of the digital display. Press the ...

...button labeled START to step the displayed item to the value you want. When you are satisfied all the settings are correct, press the lower left button marked MODE to return to normal operation. ...

..."Mode" button until Time is displayed. 2) Press and hold "Lap/RST" button until seconds display starts flashing. 3) Press "ST./STOP" button to change selected entry. 4) Press "Mode" button to ...

...position . Use the buttons " start" and "set" buttons to turn the alarm off. (some experimenting may be required). When you have set the watch press the mode button to return to normal