Questions & Answers for: Harley Davidson XL 1200 S Sportster Sport v star 1100 how to adjust idle

...adjust the throttle cable on an 2002 HD Sportster XL1200? I recently swapped out the stock grips with a custom pair and there seems to be alot of play in the throttle. Look under that throttle grip. ...

...Star 1100 Custom, and I'm noticing a not-so-nice sound. At different idles, it makes a clacking sound, which I hear in front of me to the right. There seems to be a "sweet spot" in the throttle where ...

2005 1200 sportster bogs when idling I have a 2005 1200 sportster customand whenever i stop like at a stop sign or pull the clutch and let the rpms go back to and idle the engine cuts out when i try ...

not firing on rear cylinder New Harley Davidson motorcycles are designed to stop firing on the rear cylinder , at idle , to cool the rear cylinder off. Does it run normally above idle? Contact a ...

Hi i have a xlh 1200 sportster 1989 /1990 its fitted with a edlebrock carb quick silver 2 ,right throtle working ok ie you pull back let go it all snaps back same when bike is on tick over but when im

...idle cables on the carb. Replace the intake manifold seal (round rubber boot on the intake manifold) and lubricate it with a bit of silicone spray or something. Push the carb as far as you can into ...

...idle. Check the voltage regulator for a good ground. I always put one of those "star" type lockwashers between the frame and the regulator on both mounting bolts to make sure it's got a good ...

im helping my friend put a starter in a 08\89 model 1200 cu harley but i was dismantled -everything makes sense except the the 2 clutch adjusting screw nuts 1 is floating on adjusting screw the other ...

2000 sportster idles too high Hi Wrench1211, for more information about your question please visit the websites below. Good luck and have nice day. Adjusting Throttle Cables on Harley part 1 by Dr ...

2001 sporty..hardtail....hit Chuck hole and bike instantly died. No led on module. Power to module is good but not seeing ground. Bought this scoot used and module not bolted down. any ideas? Is there