Question about 77 115 Intellisensor Plus Stud Sensor
...Stanley Stud Finder Hi Gene, Place the unit flat against the wall. Press and hold the button. The LED will come on for a second or two then go out. Slowly move the unit laterally until the LEDs come ...
stanley studfinder won't calibrate; just keeps on beeping and going through the checks replace the battery and if it still doesn't calibrate then junk it
I have plaster walls in an old house the stud finder just keeps beeping how does this thing work? Your stud finder keeps beeping because old plaster walls have lath boards behind the plaster that are ...
Question about 77 115 Intellisensor Plus Stud Sensor
red light would not go out and beep would not stop when moving finder across wall. I had this problem as well. The solution was to replace the 9 volt battery that it runs on. The beep was much louder ...
Question about 77 115 Intellisensor Plus Stud Sensor
...Stanley FatMax Stud Sensor Finder 400 (77-730) how to use stud finder Please people dont waste your money but a cheap standard one Stanley 77-730 stud finder is bad does not work at all , miss my old ...
stanley fatmax s300 manual s300 stud finder Go to http://www.youtube.com/watch?v=QInszVD9WpE&feature=youtu.be - doesn't tell you everything, but better than the manual Stanley ship with the ...
how to use a stud finder The stud finder works by picking up density of the product it is pressed and slid on..Turn your stud finder on make sure the ok light is on...then slightly press it against ...
stanley instructions I try to operate for stud sensor and That dont work i push the button for Thicker And when i release he shut down. Try using a magnet instead. Move the magnet back and forth ...
Question about 77 500 Intellilaser Pro Stud Sensor & Laser Level
Stanley stud finder AC sensor continually beeps on 10mm plasterboard wall Most stud finders have a sensitivity adjustment that should be carefully adjusted per instruction manual before use. Failure ...
Question about 77 500 Intellilaser Pro Stud Sensor & Laser Level
on Stanley stud finder model 77403 light goes on along with sound all the time button is pushed Possible low battery.
Usually answered in minutes!
918 Questions
300 Questions
107 Questions
109 Questions