projector will not come on I have power to the projector but, it will not come on. Where is the standby button? on the top panel. if you get no leds lit, the power supply is bad.
turning off the machine how do you turn off the projector safely? buy the remote from there you can put it into standby and then if wanted turn the switch off. you can find the remote at infocus.com
Question about SP-LAMP-LP5 Projector Lamp for LP580 SPLAMPLP5 SP-LAMP-LP
Infocus lp580 will not come out of standby mode Unit powers on and power light starts green momentarily then turns and stays orange. Lamp indicator flashes for several minute then turns green. Power ...
what does it mean when that blinking green light turns to orange one in lp 350? Hi This would be "Standby" When you press standby, the display and audio turn off and a blank screen is displayed for 15
Question about LP 580 Multimedia Projector
stuck on standby. says it's colling down but never turns on. the temperature sensor may need replacing. if the problem persists, there is an issue with the main board. unfortunately, there are no ...
Question about LP 820 Multimedia Projector
Infocus LP820 Projector that will not come out of standby Try a firmware upgrade.
Question about LP70+ Multimedia Projector
...I plug in the projector, it immediately goes When I plug in the projector it immediately goes into standby mode with the orange light on top. Never turns on. Can't get it out of standby. depending
When you press the power key the standby lights starts out yellow and then flashes green and goes out. The lamp light never comes on and the fan or nothing else starts with the projector. the power ...
Question about LP70+ Multimedia Projector
...then goes black and has a solid orange light. According to the documentation that means it is in standby, but it doesn't tell you how to get it out of standby. It also seems to be running hot, ...
Question about ScreenPlay 61" Rear Projection HDTV
issue cures with a reboot.General info: ISSUES: 1. IF sound main fuse/s are good. 2. If no power or standby check main fuse, standby power supply and any signs of damage you can see---burnt parts etc.
Usually answered in minutes!
400 Questions
218 Questions
72 Questions
80 Questions
76 Questions