Question about 1997 Explorer AWD
...do I use on a 1997 ford explorer front caliper bolts for brake removal? Use an Allan Wrench You could goto ur nearest Ford parts dealer and ask them if metric or standard torx were used and what
...and I don't see a description in the manual Standard = slot? If you can see the screw head you should be able to determine if it's Phillips, Robertson (square), or Torx. All come in various
TDI - standard star sizes are not working. They are Torx heads on the calibers, the parts store sells them in a 4-pack for German cars. You will need a special tool to retract the caliper pistons also
Question about Chainsaw 42mm Piston Compression Ring 024 O24 Ms240 1118-034-3000
what size socket do i need to take off the cylinder on a stihl 024 chainsaw Torx T27 is the standard size used by Stihl
star shaped tool Torx bits...are standard sizes. Can get them at any parts store. Much like Allen wrenches.
what size torx screwdriver for windshield I believe it's a #25
Question about 1998 Dakota
...of socket is needed? They are reverse TORX. Unsure of size, but standard small set will have right size. I removed and installed a new starter in my 1998 Dakota with the original bolts which are an ...
Question about 1998 Dakota
...Torx? Weird, I'd go into a hardware store and get a GRADE 8 bolt that matches up with the length and thread pitch. Grade 8 is automotive grade and much stronger than standard bolts used for building ...
Question about 1998 Dakota
...standard Phillips size 0, 1 or 2 doesn't fit it will probably be a torx-type screw needing a suitable Tx-star driver. Typical sizes are 10, 15 or 20. Be aware there is a security type of screw with a ...
Question about 1998 Dakota
...it is stripped. wheather it's metric or standard, go with the next size biggerof the oppisite, metric go standard, vice versa useing a socket pound it on, or you can use a torx (star shape) ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions