Questions & Answers for: Mazda stalling

wants to stall at idle. My 2003 Mazda 6 wants to stall will idleing.Rpm's are less then 1000. Here is the most common cause of this stall, it is the idle speed control air-bypass valve and throttle ...

mazda precidia 1992 stalled alot and now it completely stopped need ot know when it stalled, as in what did it do when it stalled, how it sounded, Ect.

...it backfires through the exaust. It has progressed to the point of not wanting to restart after stalling. I have it in the shop now, and the mech has it running. It is running fine, and hasn't ...

1995 mazda 626 stalling at low idle car begins to stall after it has ran for awhile, idles really low and stalls when brake is applied or when put into gear Check the EGR valve Please rate this a ...

When put into drive the car shakes and stalls. It 1992 mazda protege. When put into drive the car shakes and stalls. It starts right up and runs smooth in park. Also, it runs and does not stall or ...

I have an 03 Mazda tribute. It stalls out and then needs to be jump started, but shortly stalls out again. I have changed the battery and the alternator. it sounds like alternator start it up then ...

...and needs replacing. Clogged MAF sensor, cracked or loose Ait intake hose can also cause this stalling problem.--------- also air lock in the fuel,line.i agree fuel pumps replaced.But if there ...

...have a dirty idle speed adjuster which means , being dirty, it is cutting off the air supply and stalling. Above idle speed, air comes from the throttle plate opening and everything is OK. ...

B3 CARB 1987 MAZDA 323SL WILL NOT IDLE UNDER 1500RPM WHEN DRIVE IS ENGAGED STALLS. IN PARK, UNDER 1500RPM STALLS?? CARB B3 ENGAGE DRIVE STALL. WILL NOT IDLE UNDER 1500RPM Sounds like vacuum leak.Check

2012 Mazda engine troubles Any idea why a 2012 Mazda 626 engine would cut out and lose all power on the highway only? 2012 really ? what country? we have no 626 year USA that year or do you mean the ...