Questions & Answers for: sta rite pump impeller removal

Sta-Rite pool pump I am trying to remove the seal plate I need some tricks or tool suggestions to remove the seal plate. What shoud I use to remove the impeller? You have to remove the back cover from

...sta rite pool pump turbine is turning slowly and i think i need to clean out debris from the turbine, how do i do this ? With the power off, you can remove the basket and reach inside the hole behind ...

...sta rite pr2 pump The impeller is making a loud noise, I'm sure it has weeds and other debris in it. The pump has a metal band holding the pump to the strainer basket. So far I have been unable to ...

...Sta-Rite 3/4 HP MPRA6D-146L) which has stopped pumping. I removed the motor/impeller assembly from the housing because I thought that I would find the impeller jammed with a pebble. But I found ...

...PUMP MOTOR BACK FROM PLUMBING , TAKE DIFFUSER OFF AND GENTLY TURN IMPELLER BACK AND FORTH. IF THIS DOESN'T WORK HAVE A PRO DO IT !! HERE IS A LINK ON HOW TO REMOVE YOUR AND OTHER TYPES OF PUMPS ...

Sta-rite Max-E-Glas system in my pool. Every two to three weeks I have to dis assemble the pump section to remove small cedar fronds from between the impeller and the difuser. This is becoming tedious

Sta-Rite 1.5 hp Model #HMSF 1F - trying to get it apart to change seal- has been leaking and losing prime- four bolts hold the motor on- tried to separate there first but will not pull apart (maybe I&

...sta rite pool pump remove band clamp then remove the part over the impeller then the reverse screw holding the impeller on then unscrew the impeller regular thread hold the back of the motor shaft ...

...Sta-Rite Max-E-Pro Pool Pump impeller take off silver band clamp that will separate the motor from the wet end remove the plastic piece on the side with the motor impeller is inside check to see if ...

...pump turns on, starts clicking then turns off pumps water then turns off It appears that the motor is overheating, and then it turns off. There is a thermal overload switch that will turn off the ...