Questions & Answers for: Toyota Pickup sprockets

...have all cylinders? I need an easy fix when you replaced the chain did you also replace the chain sprockets they should be replaced as a set you have to be dead on as far as the timing marks go or ...

i need help to replace the timing belt well theres two rubbers its the lower rubber that broke. HELP PLEASE.... Well my friend first I need to know a little bit more. Now when you say rubbers, what do

Where are the marks to set the timing chain up you will find two silver links in the timing chain they are to be lined up with the dots on the sprockets.

timing chain marks for 1994 toyota pickup 2.4 Slide the sprocket over the key on the crankshaft. Place the timing chain on the sprocket with the single bright link aligned with the timing mark on the ...

Do you have to torque the cam bolts on a 2.4 toyota truck engine? The specifications call for torquing the camshaft bearing cap bolts to 15 ft. Lbs and the camshaft sprocket bolt to 58 ft lbs. ...

...to idle the moter down without it dyeing. It sounds like the timing belt may have slipped on the sprockets, check the timing belt . Knock ...

I have a 1992 toyota 4-wheel drive pickup with a 22RE engine. How do I return the air intake sprocket underneath the plastic cap to its original setting? It has a wheel sprocket you can move left or ...

1987 toyota 22re. head was taken off by siomeone who did not mark or align anything. I need to know how to get it on the compression stroke. The engine was torn down by someone who didn't align or ...

...very sure what you mean by "skipping in the power band." The 22 R does wear out the timing chain sprockets. You would be wise when replacing the chain, also to replace the guides, tensioner and

do the timing mark on the timing gears match up with off colored links on the timing chain every revolution No, the crank turns four times, the cams turn two times. Then they should match. Because the