Questions & Answers for: Hyundai Elantra sprockets

Question about Hyundai Elantra

1 Answer

...white paint. Also before removing the belt or chain use plastic cable ties to secure any pulleys/ sprockets so they cannot move. I used this method when replacing the timing belt on a vauxhall ...

Ad

Question about Motor 1999 Elantra

2 Answers

timing belt have be removed before mark i have removed the timing belt before i found out there is no sprocket timing mark on the cam. what should i do now? does anyone know how to find out the ...

Ad

Question about Motor 2002 Elantra

1 Answer

need to set timing need to know how to line the timing and set it on a 2002 elantra there is a hole in the cam sprocket, when it is at about 12 oclock it chould line up with a groove machined into the

...timing beltin anti clockwise direction,starting at crankshaft sprocket.ensure belt is taut between sprockets.firmly push tensioner agains belt and tighten bolt.turn engine ones around and check

...sprocket & balancer shaft sprocket timing marks lighned. Pls note: Timing marks on camshaft sprockets should align with cylinder head uppter face, dowl pins on camshaft sprockets should face ...

...oil pump sprocket and balancer shaft sprocket timing marks aligned. Timing marks on camshaft sprockets should align with cylinder head upper face. Dowel pins on camshaft sprockets should face ...

timing marks for 2000 hyundai elantra 2.0 motor The crank sprocket has a white mark that lines up with a line behind it cast into the oil pump cover. The camshaft sprocket has a marking that says UP ...

...'INTAKE' & 'EXHAUST' cams have been installed proprely. Valve timing (timing marks at camshaft sprockets in reference to crank shaft sprocket) is essential. Also,.ensure proper timing belt ...

how do i change a timing belt on a 2000 hyundai elantra hey yah do you still need help if so i can give you the full instruction repair manual for you car on how to do this if yah message me on my ...

Question about 2000 Elantra

1 Answer

...will tell you step by step how to do it for about $20. There are timing marks on the cam and crank sprockets that you have to line up with marks on the engine. You do this before you remove the belt ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...