Questions & Answers for: Razor sprockets

...sprocket onto the new BMX sprocket (it goes on with the same 4 original screws, right over the sprockets. 5. Screw the freewheel back onto the rim now. tada its

Early model Razor MX-500. Replaced motor, control module to 5 wire, and throttle. Still, clicking inside controller but will not send power to motor. What's up? the back wheel won't move it try to ...

...sprocket onto the new BMX sprocket (it goes on with the same 4 original screws, right over the sprockets. 5. Screw the freewheel back onto the rim now. tada its

...sprocket onto the new BMX sprocket (it goes on with the same 4 original screws, right over the sprockets.  5. Screw the freewheel back onto the rim now. tada its

...sprocket onto the new BMX sprocket (it goes on with the same 4 original screws, right over the sprockets. 5. Screw the freewheel back onto the rim now. tada its

Razor E-300 Electric Scooter, can hear chain going but wheel not moving Chain Moving, Wheel not bad berring If the chain is rotating when the throttle is applied but the rear wheel is not moving then ...

chain will not stay on When giving it gas Jessica: First, check the chain and sprockets. Check the two chain sprockets for worn or bent teeth. If either of the sprockets is damaged, replace them. If ...

engine runs but wheels do not move does not move when light or engine running This could be a few things: 1) Your clutch plates may have worn out so that even when the bike is in gear, it will just ...

When you turn throttle on top sprocket turns freely but when chain is on it will not turn th wheel It has an electric motor I would check the sprocket on the motor see if it has a key way it could of ...

...sprocket. Wheel is aligned. Tensioner seems tight. Problem continues. Any ideas? are the chain and sprockets worn out? I figured it out by replacing the stock 13 tooth counter sprocket with a 15 ...