Questions & Answers for: kawasaki sprockets

Question about 1991 GPZ 500 S - GPX 500 R

1 Answer

sprockets the sprocket behind the flywheel keeps locking up and breaking. could it have something to do with the roller clutch behind the flywheel or could the problem be coming from elsewere when you

Ad

I have A 2000 zx600j and I took off the rear tire to change the sprocket. My mistake was doing the back before the front sprocket and I've already cut the chain. Now I'm having a heck of a time ...

Ad

hello iwould like to lower revs by 1000at say 70mph what sprockets do i need You will need either a larger transmission sprocket or a smaller wheel sprocket. The larger percentage change will occur ...

Question about 1992 Zephyr 1100

1 Answer

how do remove sprocket small one tryed not moving Lock the bike in gear so the sprocket won't turn. Remember that the locknut is a left-hand thread and may have locktite on. If the sprocket still ...

Question about 1992 Zephyr 1100

1 Answer

Front sprocket on the GPX600R is to thin for the spline. Is there a spacer or sleeve that should take up the space. There is about quater inch of movement from the back of the sprocket to the engine ...

Question about 1999 ZRX 1100

1 Answer

How do you know a chain and sprockets need replacing? Chain seems to be stretching regularly When the chain adjusters are nearing maximum adjustment range the chain is definitely ready to be replaced.

My kawasai zr 7, 2001 revs too high in top gear, chain sprockets are, 16, 39 is this standard? My Kawasaki zr7, 2001 has new chain and sprockets, seems to rev too high in top gear, can go into top at ...

Question about Ninja Zx7r Zx9r '94 To '04

1 Answer

how to replace front sprocketKawasaki How To Install Slacken off chain, remove front sprocket cover (6mm hex keys), Remove centre bolt holding sprocket, and prise off sprocket, it's located on a ...

Question about 2000 ZX-9 R Ninja

1 Answer

kawasaki torque specs specs on...rear sprocket bolts..front sprocket bolt..rear axle nut..front calaper bolts ...thanks Axle nut 145 Nm rear sprocket nuts B and C models 74 Nm rear sprocket but E and ...

2000 800B. While trying to break the nut on the front sprocket, should the sprocket move with the nut? Of course. The bolt is in the middle of the splined shaft and holds the sprocket as well. Some ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...