Questions & Answers for: Hyundai sprockets

...all line up when fitted. Is there a secret to doing this? 1.Align the timing marks of the camshaft sprockets (on the front and rear sides) and the crankshaft sprocket (At the top dead center

...timing beltin anti clockwise direction,starting at crankshaft sprocket.ensure belt is taut between sprockets.firmly push tensioner agains belt and tighten bolt.turn engine ones around and check

...sprocket & balancer shaft sprocket timing marks lighned. Pls note: Timing marks on camshaft sprockets should align with cylinder head uppter face, dowl pins on camshaft sprockets should face ...

how to set the timing belt on sprockets there are timing marks on the sprockets. the upper siprocket should have the dowel pin in the 12 oclock position then you will see a mark on the right side of ...

...oil pump sprocket and balancer shaft sprocket timing marks aligned. Timing marks on camshaft sprockets should align with cylinder head upper face. Dowel pins on camshaft sprockets should face ...

timing marks for 2000 hyundai elantra 2.0 motor The crank sprocket has a white mark that lines up with a line behind it cast into the oil pump cover. The camshaft sprocket has a marking that says UP ...

...Temporarily lock the tensioner in place. Align the timing marks of the camshaft and crankshaft sprockets. Install the timing belt on the crankshaft sprocket, then onto the rear camshaft

...to the cylinder block. Install the tensioner pulley to the tensioner arm. Install the camshaft sprockets and align the timing marks. NOTE When installing the camshaft sprockets, fasten them ...

how do i change a timing belt on a 2000 hyundai elantra hey yah do you still need help if so i can give you the full instruction repair manual for you car on how to do this if yah message me on my ...

...2009 Hyundai Genesis with a 4.6-liter engine are located on the crankshaft pulley and the camshaft sprockets. To align the timing, you'll need to follow these steps: Disconnect the negative battery ...