Questions & Answers for: sprockets ATVs

how do i install a yfm350 atv front sprocket how do i install a front sprocket on a yamaha yfm350 atv Pull cover & remove nut after bending down locktab.Replace sprocket with new. Retighten with ...

atv 250 cc yamaha beartracker timing marks where are the timing marks for setting the valve lash cam sprocket and flywheel..

...front sprocket jumps, what can it be? thanks My first check would be the condition of the chain and sprockets. Check to make sure all of the teeth are still ok and if the tension of the chain is ...

How do you set the timing on a 110 fsn 4 wheeler set the engine at top dead center. that is the piston all the way to the top. the cam will have a mark on it. if there is a circle only then set it to ...

yamaha banshee i just bought new sprockets for my 05 yamaha banshee & need help sizing the chain, stock gears are as follows; front sprocket is a 14 tooth & the rear is a 41 which requires a 104 link ...

When you turn throttle on top sprocket turns freely but when chain is on it will not turn th wheel It has an electric motor I would check the sprocket on the motor see if it has a key way it could of ...

how do i set timing on a 2000kawasaki prairie This procedure is for 200 Kawasaki Prairie 400 1:on the flywheel cover, remove the pull starter asembley so you can turn the engine over by using a wrench

...off the back wheel sprocket, how do I fix that? . one thing thats very important is that both sprockets line up precisely. put a straight edge across em and check that. a bad bearing someplace ...

I have a 2001 raptor 660 and it's got a replace the sprockets in the chain and when I did that the front sprocket like gave compression loose and now it won't start it just turns over I don't know ...

2003 Yamaha Raptor 660R. How do I change rear base of sprocket off the axle ? I'm trying to take off not just the sprocket but also the base that's on the axle.... Edited text to translate from ...