Questions & Answers for: Ford Ranger sprocket supply

Question about 1993 Ranger SuperCab

2 Answers

timing belt installation I am trying to replace my timing belt but at the crankshaft sprocket there is a belt guide on the radiator side of the sprocket. Does the sprocket need to be removed to get ...

Ad

Question about 1997 Ranger SuperCab

1 Answer

...4 cyl) or timing chain (V6) With the V6 timing chain you simply line up the timing marks on the two sprockets so that they are pointing directly toward each other, crankshaft sprocket with the mark ...

Ad

need to find out where timing marks go CHECK THE CAMSHAFT SPROCKET FOR A PUNCHED MARK AND NOTCH IN TIMING BELT INNER COVER ALIGNE THEASE AND CHECK FOR CRANKSHAFT SPROCKET FOR A CHAMFERED TOOTH AND ...

...is at TDC (top dead center) with crankshaft key pointing straight up and circle on crankshaft sprocket (6306) aligned with notch in engine front cover (6019) . Align triangle on camshaft ...

Question about 1997 Ranger SuperCab

1 Answer

I can't find timing mark on cam sprocket For the 1997 Ford Ranger: Unspecified Engine Size: Click on the following: direct, free Link. It shows the Timing Marks for the Camshaft Sprocket and Oil Pump ...

Question about 1999 Ranger SuperCab

1 Answer

need timing marks for a 1999 ford ranger Align the timing marks: Align the crankshaft sprocket mark to the front cover notch. Align the oil pump sprocket diamond to the engine front cover diamond. ...

Question about 1999 Ranger SuperCab

1 Answer

...marks are on the belt pulley and timing cover, so you have to mate it up to see them. The cam sprocket mark goes on the bottom, and aligns with another mark on the timing cover. There is a plug ...

Question about 2001 Ranger Regular Cab

1 Answer

...supply manifold. Remove the accessory drive belt. Remove the thermostat housing. Remove the roller followers. NOTE You must retime the LH and RH camshafts when either camshaft is disturbed. Turn the ...

Question about 2005 Ranger

1 Answer

...is at TDC (top dead center) with crankshaft key pointing straight up and circle on crankshaft sprocket (6306) aligned with notch in engine front cover (6019) . Align triangle on camshaft ...

...to set timing on 2001 Ford Ranger 2.5L The oil pump on the left side has two diamond marks on the sprocket and block; they must line up, and the two triangular marks on the camshaft sprocket and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...