Questions & Answers for: Pontiac sprocket supply

Me A Request to my Nickname here @aol.com SPECIAL TOOLS REQUIRED (or equivalents) J-36008, Camshaft sprocket timing alignment pins. J-39579, Camshaft sprocket wrench. CAUTIONS: The timing chain on the

2000 pontiac grand am 2.4l, no markings on the sprockets for the timing, what is the positions of sprockets to put in alignment? You will need two small bolt's, that you thread through the hold's on ...

...Timing Chain and Gears REMOVAL & INSTALLATION 2.2L Engine Fig. 1: The timing marks on the sprockets should be in alignment. If not, turn the crankshaft until the marks are aligned Fig. 2: ...

...or go to library and use chilton books There SHOULD be marks on the block right where the cam sprockets and crank sprockets go. There should also be corresponding dots on the crank sprocket and ...

...dual over head cam wont to know how to time the top 2 cam rotate the engine till the crankshaft sprocket mark lines up with the second silver link on the chain, should @ the 5:00 position. on the ...

...the cams with the crank, new chain only has one marked link Rotate the engine until the crankshaft sprocket mark aligns with the second silver link (2) at the 5 o'clock position. Refer to the ...

...pump using the plug at the bottom of the pump. mportant: The water pump holding tool supports the sprocket and chain during water pump service. The tool must be used or the balance shaft must be ...

i changed the waterpump on a 98 Sunfire and need to know how to set the timing for the camshaft sprockets and crankshaft sprocket. hey does anybody know what the gear next to the keyway is?

gears Hi there:Check this information on 2004 Pontiac Sunfire 2.2L SFI DOHC 4cylFig. Align the sprocket timing marks with the alignment tabs on the tensioner during timing chain installation-2.2L

how to take off the timing gear/ camshaft/ crankshaft off I figured out the timing gear is wore out on my 89 pontiac grand am. But how do I take off the sprockets? Here's a link on removing your ...