...earlier in this information. Rotate the engine clockwise to align the timing marks on the camshaft sprockets and crankshaft balancer to the front cover, if the marks are visible. If no timing marks ...
...like a washing machine at idle from all the worn parts as well as some having a fiber type cam sprocket that wears out(used to help silence any gear slap noise)Hope this somewhat
pics on 1996 lumina 3.4 twin cam timming belt drive This pic does not show all timing marks, but I will paste procedure from autozone.com below. 1996 3.4L Engines To install: Install the camshaft ...
fuse and relay for the fuel pump The fuel-pump relay unit is responsible for turning the fuel pump on when it detects the engine is running. When the ignition signal stops, the fuel-pump relay ...
...that is set when installing the timing chain: 2.5L, 2.8L and 3.1L Engines Fig. 4: Timing chain and sprocket removal - 2.5L engine Fig. 5: Timing chain and sprocket removal - 1996 3.1L engine shown ...
...If there are any timing marks drawn on the camshaft pulleys, erase them. Loosen the camshaft sprocket bolts. Using a rubber hammer, tap each camshaft sprocket to remove any taper. Tighten the ...
...the timing cover to get at the timing belt ! The crankshaft has marks on it as does the cam shaft sprocket , these marks have to be at a certain spot it to be in time ! Did your timing belt wear
Usually answered in minutes!
964 Questions
809 Questions
661 Questions
639 Questions
448 Questions
