Questions & Answers for: Mazda sprocket

.005 clearance between crankshaft and timing belt sprocket. 1993 Mazda B2200 2.2L Carb. the size of the crank is .985 outside OD & the timing belt sprocket is .990 inside. It is a remanufactured crank

cant find marks to set calm shaft on a Mazda 6 you will find 2 notches in both cam shaft sprockets these should line up across the face of the head and point to each other in the middle of the head if

...MPV Timing marks on the 3L motor are: (looking from the front of the engine) right side camshaft sprocket (1 dot on sprocket and the cylinder head); left side camshaft sprocket (1 dot on sprocket ...

timing belt markings mazda B2500 1998 Timing Belt, Sprockets & Front CoverRemoval & InstallationTiming beltTo Remove: Disconnect the negative battery cable. Remove the exhaust side spark plugs

...BOLT TO LOCK THE TENSIONER IN THE RETRACTED POSITION. INSTALL NEW TIMING OVER THE CRANKSHAFT SPROCKET AND THEN COUNTERCLOCKWISE OVER THE AUXILIARY AND CAMSHAFT SPROCKETS MAKING SURE THE LUGS

...order 1 3 4 2 counter clockwise on distributor the timing marks are located on the crankshaft sprocket and cam shaft sprocket disconnect the negative battery terminal prier to any work

...engage the keyway. Turn the crankshaft pulley clockwise until the timing mark on the top camshaft sprocket, which is marked with a line on the sprocket with a number 1 next to it, is lined up with ...

...Look through the access hole in the belt cover to be sure that the timing mark on the cam drive sprocket is aligned with the pointer on the inner belt cover.NOTEAlways turn the engine in the ...

...and slowly slowly turn the engine until you see all the marks aligned. On the Camshafts the two sprockets do have the letters "E" and "I", E= Exhaust and I= Inlet.means that the inner to

removal of the crankshaft timing sprocket R2 diesel Hi Why are you removing this sprocket? Or, do you mean crankshaft pulley? If you are looking to removing the timing sprocket be aware that you will ...