Questions & Answers for: Ford spout connector located

Question about 1995 Bronco

1 Answer

...spout connector to adjust the timing. It's like remove the vacuum hose on an early style distributor. If you're unable to locate the spout connector, you can still re-set the timing. It's not a big ...

Ad

...line time the 302 and I can't find the spout to disconnect the computer on this 88 ford crown vic. Sisters car had loose dist. lock bolt the spout connector should be in the harness at the ...

Ad

Spout Connector" is used to control the engine timing by dis-connecting the timing control from the timing control unit, and you must remove the inline spout connector before you can change or set the

Question about 1993 Ranger SuperCab

1 Answer

...spout connector on 1993 3.0 ranger xlt ..it appears that mine is missing..would this cause engine knocking under acceleration in a high gear ?? The SPOUT connector, if disconnected, would prevent the ...

...spout connector flat square gray in color located in the area of the distributor of lying on the intake taped to the wiring harness.there is a two wire plug(called the spout) that has a flat cap that ...

Question about 1989 Ranger

1 Answer

spout connector located on Ford Ranger 1987 2.3L 4 cylinder. and what does it look like. Hello pennockgaryc: My name is Roger and I will help you. The spout connector will be taped to the wire harness

1988 mustang 2.3 liter,no turbo,natural.Where is the spout connector located The spout is located in the wiring haness next to the Ignition module, it is a square plastic shorting plug.

Question about 1994 F250 Supercab

1 Answer

Spout Connector referred to for setting ignition timing? Here is a site to look at, has pictures that may help, also other wriitten directions that tell of other possible locations to find it...http:/

...spout connector location 1989 ford f250 xlt need help locating spout connector for 1989 ford f250 xlt lariat if you look on the distributor you will see the large connector for the mudule bolted to ...

...plug should be in the harness at the distributor. look for the shorting bar spout connector located left rear corner of the engine compartment where it goes into the TFI ICM MODULE HARNESS

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...