Questions & Answers for: Nissan Altima spinning wheel

...wheel that the belt is spinning on and it also makes a squeeking sound sometimes when I press the gas pedal. And also when I turn the car off it also has a squeeking sound. What do you think is the ...

...be easy to determine. Jack up the rear of the vehicle and check each wheel while spinning by hand for the noise. Nissan SCOPE Certified Technician with 12+ years experience in a Nissan

Nissan Almera Air Con Advice I Bought an X Reg (2000)Almera about 2 months ago. The Air Con wheel does not engage (Spin) at all when the button is pressed even tho the light on the dash comes on. I've

key want turn but the silver part where you insert the key spins freely the steering wheel is locked tried moving back and forth but nothing made sure in park still nothing tried lube an nothing... ...

I have a 2006 Nissan Altima 2.5SL. It has a rear whining noise that starts from about 35mph to 60mph. I just had the tires replaced and the problem is still occurring. wheel bearings ; raise car spin ...

02 altima engine will not turn over, bench checked the starter and battery. Turn the key you can hear the starter engage but it wont spin. rotated the engin by hand so it not locked up. cleaned the ...

...wheel bearing can make a roaring sound from the rear wheels feel the tires for a rough tread if they feel smooth then jack it up and spin the rear wheels you might hear the noise while spinning by ...

rear end noise when driving 2006 nissan altima makes loud humming noise when moving. really bad in back seat Your car has no "rear end" as people used to call them. The "rear end" was a set of gears ...

proportioning valve stuck Brakes are stIcking a lot of different things can cause brakes to stick. i need more info?? did you jack it up and check to see if tires free spin with normal pressure? is it

2010 Nissan Altima clicking sound front driver's side while driving Hey guys I have an issue I just recently started to take into notice. I have a 2010 Nissan Altima 2.5 SL and with the 17" factory ...