Questions & Answers for: Chevrolet S 10 spinning wheel

Ad

one rear wheel spins and the other does not 96 chev s-10: when i apply the throttle i often get stuck, because one of my rear wheels (driver side) does not spin. i checked to make sure the brake was ...

Ad

Question about 1996 S-10 Pickup

1 Answer

96 chev s-10 rearend one wheel spins the other does not. brakes r not stuck and the axle is fine. any ideas? my e is warrenbear@ymail.com thanx to ya, if u can help! This is normal for an open ...

Ad

I am looking for the factory torque settings for the front wheel bearings for a 2004 Chevy s10 pick up. IF YOU HAVE 4WD YOU WILL HAVE TO REPLACE BEARINGS.NOT ADJUSTABLE. IF YOU HAVE A 2WD YOU WILL ...

location of crankshaft sensor on a 98 chevy s10 2.2 liter It is located on the passenger side of the engine block just under the ignition module you can see it from underside. The easiest way to see ...

Question about 1999 S-10 Pickup

2 Answers

will not go into 4 wheel drive The truck is an automatic and has a gear in floor to engage into 4 wheel drive. When I move gear to 4 hi the wheels do not change or spin. Hi Thank You for using FixYa. ...

Question about 1999 S-10 Pickup

1 Answer

Truck sat for about a year and now when in park rear wheels both spin freely. When in gear pinion and ring gear do not seem to engage but wheels spin freely without making driveshaft spin. Is this in ...

have 2001 chevy s10 np233 transfer case can hear it shifting but only got rear wheels spinning..raise off ground get front to spin.. It may be that the traction control system only allows the front ...

Question about 2001 S-10

1 Answer

motor mount 84 s10 replacment mount replacment,2 wheel drive six cly.bolts just spin,how do i git to the nuts Usually you have to remove the stud nuts first then raise motor up to access the bolts ...

...up and put it in drive, and carefully, slowly let their foot off the brake. Once the wheels start spinning, you should see an AC voltage reading at the sensor on your meter. The voltage will ...

...wheel that is spinning faster. This will wear the pads out on the side that the computer is able to "see" the wheel speed. You need to get the sensors looked at. Check them to see if they are ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...