Questions & Answers for: kawasaki spinning wheel

Ad

speedodmeter does not work after tire change remove the cable from the drive at the wheel lift the front wheel spin it see if the drive spins around if not you have a problem with the drive if it ...

Ad

Question about 2005 EN 500 Vulcan

1 Answer

Drive Chain noise The chain or wheel makes a crunching sound when taking off. While coasting with the clutch in, the rear sprocket makes a sawing sound. raise the wheel up in the air buddy and oil the

Ad

can you raise the rear tire and replicate the vibe with the wheel spinning? Check your front wheel balance. You may have lost a balance weight of the wheel rim. Have you hit a kerb recently or pothole

Question about 2007 ZX-6R

1 Answer

drive problem sometimes when im rideing and i bring in the clutch lever it feels like it donsnt engage still feel the engine breaking like cumming off the throttle without bringing in the clutch then ...

how to take off front wheel of kawasaki zx-7r 1997 ninja FIRST SECURE THE BIKE ON A SUITABLE REAR STAND, WITH THE FRONT WHEEL STIL ON THE GROUND, UNDO THE 2X 6mm ALUN KEY PINCH BOLTS ON THE R,HAND ...

Question about 2000 VN 1500 Vulcan Classic Tourer

3 Answers

...wheel is spinning true. Check the brake discs are not bent. Check the front wheel bearings have no sideways play. Check the front tyre for uneven wear. Get the wheel and tyre balanced. It may need a ...

Question about 2005 KLR 250

1 Answer

Speedometer not working, heard a noise from front wheel hub a few miles before, attached cable at hub, detached at top and when the wheel is spun the cable does not spin. Please advise. It is probably

Question about 2009 KX 250 F Monster Energy

2 Answers

...wheel spinning while the bike is running in neutral on a stand. I took the clutch apart to look for any problems. My question is should the inner hub spin with the rear wheel while being turned by ...

Question about 2007 Ninja 500R

1 Answer

weird squeaking in the front end sounds like a belt try pushing back the brake pads and dont touch the lever and see if sqeek goes ! if still there put on main stand and hold front wheel off ground ...

Question about 2007 Ninja 500R

1 Answer

1999 kawasaki kvf 300 rear wheels siezed Is it the wheel bearings or is it the transmission? You will need to raise up the back of the bike to see if the wheel spins. Check the gears are in neutral. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5944 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

ROB

Level 3 Expert

858 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...