Questions & Answers for: spinning washing machine sounds rocks

...spinning in the machine. It is definitely there during final/fast spin - not sure about other spins. The rear drum seal has leaked water into the rear bearing. Sorry, but the repair is expensive and ...

Fixed the clutch. Now has a rock crushing sound when spin starts I removed and cleaned and lub'ed the clutch and the bearing. Washer worked "OK". Now the washer has a rock crushing sound I think when ...

machine and try to rock it sids to side, there should be no movements, also check for overloading, be careful when washing things like bath towels, etc, they absorb lots of water, eg. one regular bath

washing machine#110.26742503.works perfect until spin cycle.Machine makes a load knocking sound but seems to spin.I see 2 cluches and a plastic catch.All 3 look ok to me.any ideas? replace the balance

...washing machine and indeed it is very silence during washing, but when come to spining, the whole machine is throwing itself forward with it spin! and it sound like thunder! help! it is the balancing ...

...sounds like it has rocks in it durning the spin cycle. Also sound like plane taking off. Hi, When my washer did that, I found that the shocks that hold the tub were bad... Check out this tip I wrote ...

...it left it goes away. Also when the washer spins sometimes it makes a super loud sound as it stops spinning. I would like to keep the washer any ideas, how to videos, or experience would really be ...

...spinning washer bangs and seems to rock when in the spin cycle. when empty i can spin the drum but i can also rock it. Any ideas? Sounds like the bearing in the drum has bust but shouldnt be too ...

...cycle Whole washer chugs and rocks during spin cycle no matter how much or how little I put in it. sounds like u need to balance it by adjusting the legs and then use a leveler to see if its ...

...sounds like change or rocks spinning around in drum. Spins freely, washes fine, just on spin the noise. Purchased in 2008 with no extended warranty. Could be a bad bearing or something loose on the ...